Welcome to PT Rescue
- A division of PT Hydraulics Australia, providing solutions, expertise and products to the Rescue, Fire and Emergency Services Industries -
NEW - Understanding the new NFPA High Strength 'F' Test
Powered rescue tools for emergency situations are regulated internationally using the NFPA standards test. Through a series of testing measures, different letters correlate with specific tests, and numbers rank the performance ability of a particular tool - for example A1, A2, A3 etc.
Until recently, these tests were classified from A - E with a numerical ranking up to 9. However, the NFPA standards have now introduced a further test - category 'F' with an increased strength rating, expanding the category of testing from five tests to six for rating cutter and combination tools in their ability to cut high-strength metals. The new test is a “High Strength Materials” test, otherwise known as the F bar cut test.
Until recently, these tests were classified from A - E with a numerical ranking up to 9. However, the NFPA standards have now introduced a further test - category 'F' with an increased strength rating, expanding the category of testing from five tests to six for rating cutter and combination tools in their ability to cut high-strength metals. The new test is a “High Strength Materials” test, otherwise known as the F bar cut test.
In the F test, cutters face an ultra-high-strength, low-alloy rectangular tube and can earn a performance level
between 1 (1” X 2” X 0.065”, outside dimension by wall thickness) up to the highest rating of 7 (2” X 4” X 0.250”).
The rectangular shape of the metal tested mimics the more common vehicle B-posts to provide greater insight into the ability of this tool for use with this application. By using a treated 4130 ultra-high-strength steel, the test can better evaluate cutters for today’s extrication challenges.
LUKAS rescue tools perform exceptionally well under both new and existing NFPA performance tests, earning F5 and F4 ratings for nearly a dozen cutters and combination tools from the eDRAULIC® 2.0 (E2) collection and the eDRAULIC Watertight Extrication Tools (EWXT) range with the S 799 E2 Cutter, S 799 EWXT Cutter and S 799 10,000 PSI Cutter all receiving an exceptional NFPA rating of 9 in categories A, B, C, D and E.
between 1 (1” X 2” X 0.065”, outside dimension by wall thickness) up to the highest rating of 7 (2” X 4” X 0.250”).
The rectangular shape of the metal tested mimics the more common vehicle B-posts to provide greater insight into the ability of this tool for use with this application. By using a treated 4130 ultra-high-strength steel, the test can better evaluate cutters for today’s extrication challenges.
LUKAS rescue tools perform exceptionally well under both new and existing NFPA performance tests, earning F5 and F4 ratings for nearly a dozen cutters and combination tools from the eDRAULIC® 2.0 (E2) collection and the eDRAULIC Watertight Extrication Tools (EWXT) range with the S 799 E2 Cutter, S 799 EWXT Cutter and S 799 10,000 PSI Cutter all receiving an exceptional NFPA rating of 9 in categories A, B, C, D and E.
|
- RECENT NEWS -
With the vital work that rescue tools and equipment perform, regular servicing and maintenance is critical to ensure optimum performance.
Let's start with a look at hoses... Hydraulic Hoses Hoses are an integral component of many rescue kits and should be inspected frequently. Here are some handy tips for what to look out for when conducting routine hose maintenance inspections: What to check for when inspecting a hose: · Check for any leaks · Look for visible surface defects such as cracks, kinks, abrasions or bubbles · Test the condition and smooth operation of quick couplers · Check for the presence and condition of dust caps · Hoses have a recommended life span of 10 years and the date of manufacture can be found on the crimp or printed on the hose Examples of possible hose defects: · Marks, cuts or splits on the surface of the hose · Outer layer brittle and cracking · Kinks and bends that are not normally part of the hose system · Leaks at any point in the hose · Hose end fittings damaged, parting or leaking If you notice any of these signs, always decommission the equipment immediately, refer to the equipment handbook or contact the PT Rescue team for more information and technical service requests. 
The exciting new publication from Lukas, Vehicle Extrication - The Next Generation, provides comprehensive guidance on many of the most practiced technical evolutions and processes used during vehicle extrication.
Contact PT Rescue to purchase your copy. 
PT Rescue is very excited & proud to announce that we are now the Exclusive Distributor for the full range of IDEX Fire products into selected states & territories of Australia and New Zealand.
Our exclusive distribution territory covers the ACT, Tasmania, Victoria and Western Australia, with exclusive distribution for the Alco and AWG brands in New Zealand. We are very excited to announce our partnership with Emergency One UK Ltd., the UK's leading manufacturer of specialist fire and rescue vehicles. We look forward introducing their extensive range to the Australian & New Zealand markets.
PT Rescue have long been a supporter of the ARRO Competition supplying a range of our rescue tools and equipment for the various rescue scenarios. We are now proud to announce that we are GOLD Sponsors of the event helping to ensure continued skill enhancement, knowledge sharing and networking opportunities for on-road rescuer and patient care practitioners.
A great write up on our PT Poly Bodies featured in this edition of Delivery Magazine - click on the pic below to check it out...
|
- NEW PRODUCTS -
The new range of Lukas eWXT (eDraulic Watertight Extrication Tool) Rescue Tools are set to revolutionize the way underwater rescue scenarios are approached. Able to operate under water, these powerful rescue tools are a must in any rescue cache.
ORDER YOUR NEW PT RESCUE GLOVES TODAY
FEATURING: • High level cut resistance • Superior resistance to tear • Enhanced puncture resistance • 3D knuckle protector • Cut-protection glass fibre palm • Multi-purpose usage with excellent grip • Designed for comfort and safety 
Similar to airport runway lights, PI-LIT Sequential Road Flares automatically synchronise when deployed to create a light path helping guide and alert those within their vicinity. With various colour options, flash patterns and kit sizes available, the PI-LIT Sequential Road Flare System is a handy addition to any equipment cache in areas as diverse as Emergency Services, Road Side Assistance, Utility Companies and many more
The Warning Alarm for Stability Protection (WASP) is a great new addition to our product range offering a robust and highly versatile stability alarm.
|
